Beer bottle cap (Insect protection)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have constructed an insect screen for glass beer bottles.
- Ocena
- 5 / 5
- Polubienia
- 61
- Pobrania
- 422
- Wydruki
- 4
- Wyświetlenia
- 1366
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Every design requires time and expertise.
My print settings:
- Printing method: FDM (Fused Deposition Modeling)
- Material: PETG
- Layer height: 0.2 mm
- Nozzle: 0.4 mm
- Orientation: logo on the print bed
- Infill: 50%
- Wall thickness: 1.2 mm (3 lines)
- Supports: not necessary
- Brim*: not necessary
- *(an extended first layer. Increases the contact area with the print bed and improves adhesion)
- Raft*: not necessary
- *(an additional thicker layer under the model. Only used in cases of very poor adhesion)
- Top/Bottom Layers: 3
Most should use the “Big” file, if available.
Legal information:
This model is compatible with "Standard Crown Cork".
This is a free design variant based on my own measurement results.
The sale of this model is prohibited. The model is intended for personal use.
I am not liable for incorrect use or other damages. I design to the best of my knowledge and belief with my printer settings.
For all other users:
Special requests, constructive criticism or other concerns? Then write to me.
Support:
I do not earn any money with these free models, but I do invest time, material and further training. If you want and can, you are welcome to support me. This can be done with donations in kind such as filament or money that I can use for tools or filament so that I can continue to provide models.
It is also possible to commission models after consultation.