1 / 1

DIY A10C UFC Diffuser

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Informacje o modelu

Źródło: Printables
Kategoria: Video Games
Licencja: Creative Commons — Attribution — Share Alike

Szczegóły Wydruki i komentarze Remiksy Kolekcje

Here's a diffuser with buttons to print for an A10C UFC I made. The case is from thewarthogproject.com (you can download it there).

Here's the link to the UFC: https://github.com/w3z315/a10c-simpit-pcbs/tree/main/ufc/pcb

Buttons print best with 0.2mm nozzle! The rest is printed with 0.4mm nozzle. I've printed everything on a Bambulab P1P with AMS.

I've used multicolors for the text:

Translucent PLA and Gray PLA for the Buttons, select the colors accordingly.
Translucent PLA for all Diffuser parts (e.g. the big plate)
Translucent PLA and Black PLA for the MasterCaution button

Assembly:

Print everything, put the buttons inside of the diffuser. Then insert a rod in a hole where the buttons go, as far as you can manage. Then cut off excess material. You might need to print 3 rods.