Air Conditioner Exhaust Cover Panel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple cover panel that can be used to close the exhaust hole when the air conditioner's hose is detached.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 739
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
A simple cover panel that can be used to cover your exhaust hole in your window when your air conditioner's hose is detached. This may be for whatever reason, be it that you want to close your blinds are night and the tube gets in the way, you want to remove the AC unit until you need it next, etc.
In my case I came up with this design for a combination of those reasons, and also mainly so that pests wouldn't be able to enter the opening when the air conditioner isn't in use.
This design should fit any 14-inch (155mm) hose connector, as the sizing seems fairly standardized, though it may not fit ones that have a locking mechanism integrated into the hose itself.
Print Settings:
There are no crucial print settings for this design, but I'll list the ones I used and had good success with:
Nozzle Width: 0.4mm (0.6 or 0.8mm would work perfectly fine and might be preferred for a lesser print time!)
Layer Height: 0.2mm (0.1 if you have time and want the slope on the handle to look nice)
Infill: 15%
Top and Bottom Layers: 3-4
Walls: 2
Supports: No