Crokinole Board Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Based on the Tracey boards wall mount I made a simple slide in wall mount for my Tracey board.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 63
- Wydruki
- 1
- Wyświetlenia
- 568
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Welcome to a wonderful little wall mount designed specifically for the Tracey Tournament boards. You do have to do a little drilling in the back of the board but that's easy enough and it'll make the mount extra secure IMO.
You will need 2-3 wall anchors with screws or if you can mount the center screw directly into a wall stud that would be preferred. You'll also need 2 small button head wood screws about 1" in length.
I recommend printing both pieces with 5 walls and 8 top and bottom layers with 25% or greater infill for added durability.
Print orientation should be with the larger holes up so you don't need supports.