Crokinole Board Wall Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Based on the Tracey boards wall mount I made a simple slide in wall mount for my Tracey board.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 63
- Makes
- 1
- Views
- 568
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Welcome to a wonderful little wall mount designed specifically for the Tracey Tournament boards. You do have to do a little drilling in the back of the board but that's easy enough and it'll make the mount extra secure IMO.
You will need 2-3 wall anchors with screws or if you can mount the center screw directly into a wall stud that would be preferred. You'll also need 2 small button head wood screws about 1" in length.
I recommend printing both pieces with 5 walls and 8 top and bottom layers with 25% or greater infill for added durability.
Print orientation should be with the larger holes up so you don't need supports.