Counting matching models…
The table I use for playing crokinole is barely bigger than my crokinole board, so there's not much room to keep your discs as you're playing. I designed this disc holder for this purpose. It hangs off the rail of a round tournament-size…
A simple cylinder to hold crokinole discs remixed for a Mayday board. This sleeve will hold 8 discs above the rim of the gutter.
Based off of Crokinole Canada's specifications, this is a dimentionally accurate Crokinole Disc. If printed on the PEI Smooth Spring Steel Sheet, the bottom of the disc will be smooth enough to play successfully! Made as the "Traditional…
A large, easy to read score tracker for Crokinole. The tracker makes use of the spare, thirteenth disc that comes with most Crokinole disc sets. Simply move the disk to the appropriate slot to track score throughout a match to 100. The…
Rack to hold 12 Crokinole disks. There are 2 versions: a Tournament Size (1-1/4" Disks) and a Traditional Size (1-1/8" Disks).
This is a cribbage-inspired box I made to hold my crokinole disks printed in white at .2mm layer height. There's a point tracker on the lid along with a round/game tracker at the top. The holes are sized for the pegs in the project, which…
Crokinole-finger flicking fun Easy to lean, but hard to master Find rules on the internet This one for an examble Print instructions Watch first couple of layers are perfect , as this will be the playing surface.(Up side of the board)…
Crokinole trophy. Print at 10-15% infill. Put letters on the base if you would like. I recommend using the emboss tool. It prints in 2 parts without supports. Use super glue to attach.
Board for Crokinole score keeping (non-tournament scoring).
I designed a system to hang my Ferti Crokinole on the wall. It consists on 2 bottom hooks and 1 top hook. You have to tilt the board to introduce the crokinole slot in the top hook, rotate it to make it vertical and slide it down to the…
Crokinole 20 point disk holder fits snuggly on 5mm edge and holds 7 disks, or use optional stand to sit on table. My design has a floor so no gap for disks to fall through. Images shown using clear PETG filament Easily print with PLA or…
Crokinole score tracker meant to fit inside a crokinole disc hard carry case from Brown Castle Games or Amazon. You can pick 0-95 or 5-100 point sets depending on your preference. As requested, there's a tournament variation too to track…
Welcome to a wonderful little wall mount designed specifically for the Tracey Tournament boards. You do have to do a little drilling in the back of the board but that's easy enough and it'll make the mount extra secure IMO. You will need…
Just a peg you can use for your Crokinole game. Either for the board, or for your scoring device if it uses those pegs. I had some extra colors of discs, but they didn't have any pegs for the scoring track. The custom Disc Holders in the…
This doohickey makes it easy to pull a crokinole disk out of the 20 hole. Fits Brown Castle boards, 1.38" diameter, 0.15" height.
Message me if you have an older Tracey board and need a 6mm gap. Or feel free to edit the file yourself.
Bring Crokinole anywhere you go! with this mini table top version.
Crokinole 13 Disk Holder/Dispenser v3 modified from my original version Difficult to remove support material from CROKINOLE text. If using PrusaSlicer you can add support blocker for the CROKINOLE text while keeping support for window…
Holds 8 Crokinole discs in a stackable holder. Print multiple and stack them for compact storage
Crokinole is an awesome game where you try to get the buttons in the hole – shooting from the outside of the circle.
I needed a way to hang my new Crokinole board on the wall. Print Settings Printer Brand: Prusa Printer: Prusa Clone **Supports:** No Resolution: .2 **Filament:** sanSmart TPU and MG Chem PetG TPU and PET-G Blue and Clear Notes: Printed…
Fits 1.5 inch board Original design only fit 1 inch thick boards, I remodeled it to fit mine. Now my board has a spot thats not on the floor leaning against the wall.
Introduction I’m sharing a travel version of the well-known skill game, Crokinole. The objective is to flick discs toward the center of the board while trying to ensure your opponent scores fewer points. It’s worth noting that this…
Fits two full sets with room for a spare of each color. Needs to be scaled to 2540% because I'm dumb and didn't export it correctly.
This is an old model of mine that I'm finally uploading. It is a disk for the game Crokinole . With the right number of perimeters and infill percentage, it can match the weight of the wooden version.
A template to determine the location of the posts on a Crokinole board I'm building.
Fits two full sets with room for a spare of each color. Needs to be scaled to 2540% because I'm dumb and didn't export it correctly.
This is very similar to and inspired by, but not a remix of, another excellent crokinole disc holder by @Strider460_271212 . That design can be found here: https://www.printables.com/model/200655-crokinole-disk-rack . I wanted to learn…
Replication of a crokinole board with a model that can be used as an ornament. Printed on MINI with multiple filament changes. Print file includes filament swaps.
This Crokinole disk holder is made with friction fit cap which can be twisted to open slot for dispensing disks, one at a time, during game play. Cap can be easily removed to fill container with disks. Easy to print with PLA or PETG 0.2…
A tube with a twist on lid to store one set of tournament sized (1 ¼" x ⅜") Crokinole discs. As many sets contain a spare disc, this tube is designed to accommodate 13 discs. Tolerances are pretty loose in order to account for variations…
Update 2026-01-01: As some people play with 12 discs in a 2-player game, I added two different files to support 12 discs: a 6x2 tray and a 4x3 tray. The 6x2 tray may not fit on smaller print beds, but the 4x3 tray should fit most. - - - -…
A tabletop holder to store your your 20s in Crokinole. Accommodates up to 8 discs for those perfect games, or use one holder for all players. A cutout in two sides of the holder allows you to easily keep track of how many 20s have been…
A 20s holder for Crokinole. The holder mounts onto the side rail of your board. It is meant for boards with a typical ¼" width sidewall. Windows on four sides of the holder allows you to easily keep track of how many 20s have been sunk…
Disk Holder that can be used sitting on the rim of a Traceys board or used on the table. 20 holder should be printed with support. No supports needed for the disk holder.
