Matsuyama's paradox
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just my design of a Matsuyama's Paradox: it is a math puzzle/optical illusionFor references see:Wikipedia…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 138
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Public Domain
Just my design of a Matsuyama's Paradox: it is a math puzzle/optical illusion For references see:
- Wikipedia (https://en.wikipedia.org/wiki/Missing_square_puzzle)
video of Physicsfun (https://www.youtube.com/watch?v=L3b8GtviKb8) Print Settings
Printer Brand:
XYZprinting
Printer:
da Vinci 1.0 Pro 3in1
No
Supports:
No
0.20
Infill:
100%
Notes:
The printing is very simple: I used PLA white (for the tiles) and PLA silk-black (for the base) Printing set: 220 °C, plate 40°C; nozzle 0.4 mm.
Print Speed of 30 mm/s.
Printing time 4 h about
Unique critical point: the printing of "lack" tile (it is very small and it may require some sanding)
Note: the poor quality of one tile showed in the photos is due to the printing bed (poorly covered with blue tape :-( )
Time 0: the base is covered with the 4 main tiles
Removal of 4 main tiles from the base (the small tile in the lower part of base is the "lack")
Flip any tile and reposition over the base (step 1)
Step 2
Step 3
Step 4, plus the small tile "lack" to complete the whole surface area of base... ???
How I Designed This ===================The drawing made with Fusion 360
Category: 3D Printing