1 / 17
Shakaworld3D Basket Weave Little Dragon — zdjęcie 1
1 / 17

Shakaworld3D Basket Weave Little Dragon

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Easy to print in place dragon, no supports or brim needed (brim may be needed depending on your printer bed adhesion)

Ocena
0 / 5
Polubienia
5
Wydruki
0
Wyświetlenia
181
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables

Easy to print no supports or brim is needed. This Dragon will fit well within an 180mm X 180mm build plate. 2 smaller dragon pictured were printed with a .4 nozzle .16 layer height 3 walls. At 100% it weighs in at 56g and 118mm X 121mm X 38mm. Right now I'm testing 80% and 60% - At 80% four will fit on a 180mm X 180mm build plate. Silver dragon was printed at 150% .6 nozzle .18 layer height 2 walls. The rainbow dragon was printed at 200% since it fits on a 256mm X 256mm print bed.

Update: I was able to scale down to 60% which is 5 1/2 inches long - all joints work well, the legs take a little bit of gentle pressure to allow them to move freely - pictures have been added.

 

Tagi