Shakaworld3D Basket Weave Little Dragon
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easy to print in place dragon, no supports or brim needed (brim may be needed depending on your printer bed adhesion)
- Rating
- 0 / 5
- Likes
- 5
- Makes
- 0
- Views
- 181
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
Easy to print no supports or brim is needed. This Dragon will fit well within an 180mm X 180mm build plate. 2 smaller dragon pictured were printed with a .4 nozzle .16 layer height 3 walls. At 100% it weighs in at 56g and 118mm X 121mm X 38mm. Right now I'm testing 80% and 60% - At 80% four will fit on a 180mm X 180mm build plate. Silver dragon was printed at 150% .6 nozzle .18 layer height 2 walls. The rainbow dragon was printed at 200% since it fits on a 256mm X 256mm print bed.
Update: I was able to scale down to 60% which is 5 1/2 inches long - all joints work well, the legs take a little bit of gentle pressure to allow them to move freely - pictures have been added.