1 / 3
Milk Crate Hinges
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hinges for milk crate, commonly used for DIY fishing crate.
- Ocena
- 5 / 5
- Polubienia
- 59
- Pobrania
- 212
- Wydruki
- 0
- Wyświetlenia
- 1619
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (79)Powiązane
Printed with PETG but you can print this with anything.
I used support from the build plate only. I used 100% infill the lower part of each model to give a strong base for the screws.
I use a simple piece of metal wire to hold this together.
Pre-drill the holes before screwing.