Zero Resistant PTFE Coupler M10
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
One Coupler to rule them all. This one IS different
- Ocena
- 5 / 5
- Polubienia
- 41
- Pobrania
- 240
- Wydruki
- 8
- Wyświetlenia
- 728
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Working on a different Project, i needed a ptfe coupler. But they all had the same issue. They had no good interface without resistant. So i thought about, how to solve the problem and found the solution.
I present you, the best “Zero Resistant coupler”
The difference is that that the 2 Ptfe Tubes are aligned, and that the receiving PTFE Tube has an angled entrance.
Also the PTFE Coupler has a Window to check if the Tubes are connected.
Only angle the Receiving PTFE Tube, else the resistance will be higher.
There is a arrow imprinted in the Design to show the direction in which the Filament will be moving. Is also shows print orientation ;-)
The Coupler used are these:
https://www.amazon.de/gp/product/B0CS3NTBXL/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Have fun, with another of my designs!
You can support me via a tip clicking on the link:
Tip me on KO-FI by klicking here: