Zero Resistant PTFE Coupler M10
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
One Coupler to rule them all. This one IS different
- Rating
- 5 / 5
- Likes
- 41
- Downloads
- 240
- Makes
- 8
- Views
- 728
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Working on a different Project, i needed a ptfe coupler. But they all had the same issue. They had no good interface without resistant. So i thought about, how to solve the problem and found the solution.
I present you, the best “Zero Resistant coupler”
The difference is that that the 2 Ptfe Tubes are aligned, and that the receiving PTFE Tube has an angled entrance.
Also the PTFE Coupler has a Window to check if the Tubes are connected.
Only angle the Receiving PTFE Tube, else the resistance will be higher.
There is a arrow imprinted in the Design to show the direction in which the Filament will be moving. Is also shows print orientation ;-)
The Coupler used are these:
https://www.amazon.de/gp/product/B0CS3NTBXL/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Have fun, with another of my designs!
You can support me via a tip clicking on the link:
Tip me on KO-FI by klicking here: