KTM 690 Rade Garage Air Filter Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a design for the Rade Garage intake for the KTM 690 enduro. The kit comes with a half-turn style fastener that d
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 978
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
This is a design for the Rade Garage intake for the KTM 690 enduro. The kit comes with a half-turn style fastener that does not sufficiently press down on the filter cage to create a good seal with the airbox. This bracket changes the fastener to a treaded type and is slightly shorter so the proper pressure can be applied to the filter cage.
The M6 hole is offset from the center by 2mm. This offset should be forward towards the front of the bike so it lines up with the hole on the air filter.
This design requires the use of M4 and M6 heat press threaded inserts. I purchased mine on amazon:
https://www.amazon.com/gp/product/B09ZHBLGKM/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B0CH82LQS9/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
This also requires a specialty M6x20 bolt with a knob:
https://www.amazon.com/gp/product/B0CQW7BN33/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1