Nerf Jolt plunger Repair/Upgrade kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This kit is designed to replace your Nerf jolt's stock plunger assembely while meeting or exeeding stock performance.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 82
- Wydruki
- 0
- Wyświetlenia
- 604
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Dog chewed your Jolts handle?Just looking for a new upgrade perhaps? Not a problem! This is a redesigned plunger assembely for the nerf Jolt, serving as a stock replacement aiming to meet and exceed original performance while making spring modification easy.
Info:
This model includes a new wider pull handle, plunger head and Plunger tube base/ spring retainer.
- The model is designed to be a stock replacement, so there are no modifications required to the stock blaster.
-The plunger and pull handle is a two piece design for easier spring modification.
Parts required:
- (1) M5 x 0.8 thread cap screw (20mm in length)
Tools:
- Glue: I use and recomend Zap a Gap medium Ca for this project, However any glue that can bond to your chosen plastic should work.
- Phillips head screwdriver
- 4mm Allen wrench (hex key): this may differ depending on the capscrew you choose.
- Cutting tool to remove the pull handle (hacksaw, pliers, ect…) so that the spring can be removed
Important note: this kit reuses the original plunger's o-ring, rubber buffer located on the plunger head, 4 screws from the spring retainer plate and the original spring (this is optional).
Print settings:
I recomend printing the parts with 4 outer walls or more with 100% infill. I used PLA, however PETG will work aswell.