Nerf Jolt plunger Repair/Upgrade kit
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This kit is designed to replace your Nerf jolt's stock plunger assembely while meeting or exeeding stock performance.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 82
- Makes
- 0
- Views
- 599
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Dog chewed your Jolts handle?Just looking for a new upgrade perhaps? Not a problem! This is a redesigned plunger assembely for the nerf Jolt, serving as a stock replacement aiming to meet and exceed original performance while making spring modification easy.
Info:
This model includes a new wider pull handle, plunger head and Plunger tube base/ spring retainer.
- The model is designed to be a stock replacement, so there are no modifications required to the stock blaster.
-The plunger and pull handle is a two piece design for easier spring modification.
Parts required:
- (1) M5 x 0.8 thread cap screw (20mm in length)
Tools:
- Glue: I use and recomend Zap a Gap medium Ca for this project, However any glue that can bond to your chosen plastic should work.
- Phillips head screwdriver
- 4mm Allen wrench (hex key): this may differ depending on the capscrew you choose.
- Cutting tool to remove the pull handle (hacksaw, pliers, ect…) so that the spring can be removed
Important note: this kit reuses the original plunger's o-ring, rubber buffer located on the plunger head, 4 screws from the spring retainer plate and the original spring (this is optional).
Print settings:
I recomend printing the parts with 4 outer walls or more with 100% infill. I used PLA, however PETG will work aswell.