1 / 3
Acute brain slice incubator_MK2
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An updated version of the brain slice incubator
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 223
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Chemistry & Biology
- Licencja
- Creative Commons — Attribution — Noncommercial
See it in action:
Link to MK1: https://www.printables.com/model/873377-acute-brain-slice-incubator
The original incubator worked fine, but there were several shortcomings. So I decided to make a new one. The main improvements are:
- Six compartments, instead of one. You can use them to store brain slices from different regions or animals.
- Larger visor. Ideally, this can prevent air from accumulating under the slice compartments, ensuring the slices are in contact with ACSF on both sides.
- Air stone fixture. The cage on the bottom of the visor can hold the air stone in place, providing more consistent bubbling.
- Gratings on the “bottom” piece. Ideally, the gratings can also prevent air bubbles from getting trapped under the compartments.
I also uploaded the f3d file for the legs. You can adjust them accordingly to fit your beaker.
The legs were designed without any tolerance. If you're using a thicker mesh, print at a slightly larger size (e.g. 103%) to compensate for the thickness of the mesh.