3d Printer Exhaust Fan Adapter using 12032 Fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3d Printer Exhaust Fan Adapter using 12032 Fan
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 546
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a way to mount a more powerful fan to the exhaust on my 3d printer so I could print ABS and ASA without smelling them and poisoning myself. I went with a variable speed 12032 fan and some inexpensive high quality dust collection hose.
The flanged plate is designed for a light press fit in an 80mm x 20mm hole (like the one in this model QIDI Tech X-Plus3 BackPanel MOD Kit )
Or you can just mount it flat with the non-flanged plate - in which case you are going to want 3x M4x50 screws.
Print everything flat on the bed so it doesn't need supports. Filament choice probably doesn't matter. I'd recommend PETG as a minimum for potential UV and mild heat resistance.
BOM:
7x M4 hex nuts
3x M4x40 or 3x M4x50 if mounting it flat.
4x M4x10
120x32 fan - variable speed https://www.amazon.com/dp/B07R7VS6HX
120x32 fan - single speed (but better for control via relay) https://www.amazon.com/dp/B07M98DQFD
The hose I'm using (with the included medium fittings) https://www.amazon.com/dp/B0B6W2M295
This is the window vent I am using it with https://www.printables.com/model/919688-sliding-window-exhaust-vent