3d Printer Exhaust Fan Adapter using 12032 Fan
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3d Printer Exhaust Fan Adapter using 12032 Fan
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 48
- Makes
- 0
- Views
- 543
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a way to mount a more powerful fan to the exhaust on my 3d printer so I could print ABS and ASA without smelling them and poisoning myself. I went with a variable speed 12032 fan and some inexpensive high quality dust collection hose.
The flanged plate is designed for a light press fit in an 80mm x 20mm hole (like the one in this model QIDI Tech X-Plus3 BackPanel MOD Kit )
Or you can just mount it flat with the non-flanged plate - in which case you are going to want 3x M4x50 screws.
Print everything flat on the bed so it doesn't need supports. Filament choice probably doesn't matter. I'd recommend PETG as a minimum for potential UV and mild heat resistance.
BOM:
7x M4 hex nuts
3x M4x40 or 3x M4x50 if mounting it flat.
4x M4x10
120x32 fan - variable speed https://www.amazon.com/dp/B07R7VS6HX
120x32 fan - single speed (but better for control via relay) https://www.amazon.com/dp/B07M98DQFD
The hose I'm using (with the included medium fittings) https://www.amazon.com/dp/B0B6W2M295
This is the window vent I am using it with https://www.printables.com/model/919688-sliding-window-exhaust-vent