Nylon interlocked adhesive pad (print Nylon on your PEI Sheet!!!)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mechanically interlocked adhesive pad for printing with Nylon on a surface it wont stick to. (multimaterial)
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 106
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
See "Example Print File.3mf" attached for reference.
Using a multimaterial compatible printer, you can print any material onto an incompatible build plate surface with these pads.
The idea is to print a base layer from a material that does stick to your build plate, and then a nylon pad on top of it that is mechanically interlocked with the base layer so it doesn't rely on interlayer adhesion.
I used HIPS on a Creality PC (polycarbonate) build sheet for the base layer. The nylon will stick to the HIPS initially allowing you to print these few layers that interlock without it peeling off.
Instructions:
Use 0.2mm layer height only.
- Import the part you want to print.
- Right click on it in the part list and select: Add Part → Load …
- Select the two files (Base and Nylon Pad)
- Adjust the z-heights of your parts as shown in the photos and below:
- Base part z-position: 0.3mm
- Nylon Pad z-position: 0.7mm
- Main Part z-position: [part z dimension] / 2 + 0.6mm
- Change the material of the base part to your support material that will stick to the bed.
- Copy-paste the two parts as needed and tile it under your part so that it forms a raft layer.
See "Example Print File.3mf" attached for reference.