1 / 2
Ender 5 Sprite Extruder and Breakout Board Carriage Mount (With BL Touch) — zdjęcie 1
1 / 2

Ender 5 Sprite Extruder and Breakout Board Carriage Mount (With BL Touch)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A Sprite Extruder mount for the Ender 5 with a place for the associated breakout board and BL touch.

Ocena
0 / 5
Polubienia
12
Pobrania
60
Wydruki
0
Wyświetlenia
661
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I could not find an Ender 5 x-carriage mount (horizontal belt instead of top/bottom of the v-slot) for a Sprite/Sprite Pro extruder that included a good solution for mounting the breakout board in the same package. I made my own using MediaMan3D's HMG7's ender 5 carriage mount as reference geometry for the mounting holes and integrated samster395's bl touch to the file.

I used a variety of M3 screws to attach the extruder and breakout board to the extruder mount and the extruder mount to the carriage mount.

I haven't measured the exact probe offset but using +/- 40mm X and 0mm Y (depending on how your axis inversions are set up) works well so far.

Tagi