1 / 5
3 inch Puck Chlorine Tablet Pool Dispenser Basket — zdjęcie 1
1 / 5

3 inch Puck Chlorine Tablet Pool Dispenser Basket

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Chlorine Tablet Pool Dispenser Basket

Ocena
0 / 5
Polubienia
14
Pobrania
148
Wydruki
0
Wyświetlenia
636
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Summer
Licencja
Creative Commons — Attribution — Noncommercial

I needed a dispenser for chlorine tablets for my pool.  the one that came with my pool used only 1 inch pucks, and those were to small and were more expensive (as I was using 3 or 4 pucks every 2 days and could only buy smaller quantities at a higher cost per volume).  I wanted to switch to the larger 3in chlorine pucks that were much cheaper (as I could buy those in larger volume).  I looked at 3in floating dispensers and they were fairly expensive and I did not like that they floated around and did not stay by the pump outlet jet. I wanted a dispenser that  would stay where the flow of water trough the dispenser enabled the chlorine puck to dissolve at a higher rate and maintain a better level of chlorine in the pool.  So this basket is what I came up with.  It stays by the  pump outlet jet and is simply clipped to the side of the pool using a couple small carabiner clips and a wire lanyard made from 18 gauge electrical wire that was adjusted to the depth required.  It as been working great so far.  I also included a basket were two pucks can be loaded at a time (for large pools or when you go away for a short holiday).

Tagi