3 inch Puck Chlorine Tablet Pool Dispenser Basket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Chlorine Tablet Pool Dispenser Basket
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 148
- Makes
- 0
- Views
- 636
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Summer
- License
- Creative Commons — Attribution — Noncommercial
I needed a dispenser for chlorine tablets for my pool. the one that came with my pool used only 1 inch pucks, and those were to small and were more expensive (as I was using 3 or 4 pucks every 2 days and could only buy smaller quantities at a higher cost per volume). I wanted to switch to the larger 3in chlorine pucks that were much cheaper (as I could buy those in larger volume). I looked at 3in floating dispensers and they were fairly expensive and I did not like that they floated around and did not stay by the pump outlet jet. I wanted a dispenser that would stay where the flow of water trough the dispenser enabled the chlorine puck to dissolve at a higher rate and maintain a better level of chlorine in the pool. So this basket is what I came up with. It stays by the pump outlet jet and is simply clipped to the side of the pool using a couple small carabiner clips and a wire lanyard made from 18 gauge electrical wire that was adjusted to the depth required. It as been working great so far. I also included a basket were two pucks can be loaded at a time (for large pools or when you go away for a short holiday).