DRZ400 Engine Stand Attachments
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted something better than blocks of wood to hold my engine up while I worked on it. This is what I wound up with.…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 108
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
I wanted something better than blocks of wood to hold my engine up while I worked on it. This is what I wound up with. they're so high so you can put the crankshaft thru, install the flywheel, do all of that stuff and still flip the thing over however you want. I've attached the original files so you can modify these to be shorter if you want. The total length is not really needed.
The printable peg goes in the swingarm mounting spot to balance the engine case when it's on the stator side.
One stator cover was meant to be used with aluminum square tube. Works fine with the peg tho
Category: Automotive