1 / 5
PC4-M10 fitting like ptfe tube holder rotation free pass through — zdjęcie 1
1 / 5

PC4-M10 fitting like ptfe tube holder rotation free pass through

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

this is a printable PTFE tube holder, rotation free, let it pass through, has thread the same as PC4-M10 fitting.

Ocena
4 / 5
Polubienia
11
Pobrania
71
Wydruki
1
Wyświetlenia
377
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

PC4-M10 is a tricky part, not easy to model , because of it's thread type, it's not standard ISO metric M10.

Instead, it's actually BSP 1/8 , a weird thread type.

If we model the thread differently (ie ISO M10), the printed screw/thread body cannot screw into the PC4-M10 hole of my voron filter box back hole (design for PC4-M10 fitting).

In order to share the knowledge and hopefully more people can correctly model this thread type in other fun projects , I also uploaded the fusion360 source file.

 

Usage of this part:

I need this part to install in the back of my Voron2.4 filter output, or ptfe tube input.

original design is a PC4-M10 , however after some time of use, the PC4-M10 cut the long ptfe tube in half, most likely because the tube need to rotate from time to time, and the fitting's metal claw cut and cut and cut, a little by a little.

The long ptfe tube is not dirt cheap, this is bad.

Therefore I decided to print a rotation free PC4-M10 like part to screw into the filter box hole.

The middle hole is designed to be loose so the ptfe tube can rotate freely.

 

Test:

  • tested using PETG
  • the printed PC4-M10 like part can install into the filter box hole (a injection mould part).
  • the printed PC4-M10 hole part can correctly have a metal PC4-M10 fitting screwed in.

Print setting:

no support needed.

 

 

Tagi