PC4-M10 fitting like ptfe tube holder rotation free pass through
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
this is a printable PTFE tube holder, rotation free, let it pass through, has thread the same as PC4-M10 fitting.
- Rating
- 4 / 5
- Likes
- 11
- Downloads
- 71
- Makes
- 1
- Views
- 377
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
PC4-M10 is a tricky part, not easy to model , because of it's thread type, it's not standard ISO metric M10.
Instead, it's actually BSP 1/8 , a weird thread type.
If we model the thread differently (ie ISO M10), the printed screw/thread body cannot screw into the PC4-M10 hole of my voron filter box back hole (design for PC4-M10 fitting).
In order to share the knowledge and hopefully more people can correctly model this thread type in other fun projects , I also uploaded the fusion360 source file.
Usage of this part:
I need this part to install in the back of my Voron2.4 filter output, or ptfe tube input.
original design is a PC4-M10 , however after some time of use, the PC4-M10 cut the long ptfe tube in half, most likely because the tube need to rotate from time to time, and the fitting's metal claw cut and cut and cut, a little by a little.
The long ptfe tube is not dirt cheap, this is bad.
Therefore I decided to print a rotation free PC4-M10 like part to screw into the filter box hole.
The middle hole is designed to be loose so the ptfe tube can rotate freely.
Test:
- tested using PETG
- the printed PC4-M10 like part can install into the filter box hole (a injection mould part).
- the printed PC4-M10 hole part can correctly have a metal PC4-M10 fitting screwed in.
Print setting:
no support needed.