1 / 6
PIP Swivel Hanger
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print in place swivel hanger.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 169
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (12)Powiązane
This is the sister design to my other swivel mount. This design is print in place and requires only the screws to mount it. The mount base is sized for #8 screws.
The files are designed in the proper print orientation and don't require support. The ring my have some loose strands from bridging. supports can be used if desired.
While this design does freely spin, it doesn't spin as well as the other design. However, this does not require the extra hardware and bearing.
Thank you!