Hanging Orb Planter (For artificial plants or succulents)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fancy looking hanging orb planter I designed! It's meant for artificial plants, but succulents would also work great!
- Ocena
- 5 / 5
- Polubienia
- 220
- Pobrania
- 332
- Wydruki
- 1
- Wyświetlenia
- 1990
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
The cage is 20cm in diameter with each of the caps adding another ~4.5cm. Top and bottom caps available in your choice of convex or concave styles (or design your own!).
Artificial plants are attached by sticking into a piece of floral foam pressed into the pot. The easiest way to add the plants is by first filling out the bottom half with the top detached, then attach the top and add the rest of the plants using needle nose pliers.
If you'd like to put a succulent in it, I would recommend printing another small pot that looks nice and using that instead of my tiny basic one.
Assembly requirements:
- 4 M3x20 machine screws + nuts
- 2 6x3/4" countersunk wood screws (optional)
- glue
- floral foam
Scale information:
- 65% = 13cm cage diameter, fits M2 screws
- 135% = 27cm cage diameter, fits M4 screws
I recommend using a brim and trying to minimize the amount of supports you use, as they're extremely wasteful. If it won't slice, try changing your support settings.
HINGE DOES NOT OPEN FURTHER THAN SHOWN IN PICTURE!