Simple tool holder for my small metal lathe
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Features 3 mt2 holes for tailstock accessories and holes for a chuck key for the 3 jaw chuck and two chuck keys.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 153
- Wydruki
- 0
- Wyświetlenia
- 691
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Simple tool holder for my small metal lathe, features 3 mt2 holes for tailstock accessories and holes for a chuck key for the 3 jaw chuck and two chuck keys for the drill holder and my pillar drill next to my lathe. the back is angled to point the tolls away from the wall and the holes go all the way through so chips can be cleared easily.
Prints well with no supports needed.
I printed with only one wall by mistake but it turned out fine and if i break it at least I can print another.
I used a 0.8mm nozzle and 0.6mm layer heights. I'm sure you'd be fine to print at whatever settings you're generally happy with.