68 modeli
Support to hold e bike braking sensor on shimano MT200 brakes, left and right, no glue needed, it is held using the same fixing screw of the brakes, see photos. (but if you want to be more sure that it does not come off, you can use glue,…
Inspired by Dieter Rams minimalist design. I fixed some flaws after i printed the Model illustrated above. Made for the ZK-MT21S, may also work with other models. I added slightly different Knobs, i recommend the shorter ones for looks or…
These are simple holders for MT2 and MT3 tools. Both models use #8 screws to mount to a workbench or piece of wood. STEP files are included. These are based off of this original design by CABTinker on thingiverse. I've added the missing…
Floor stand for tower orientation of 2U equipment. I designed this for my APC SMT2200RM2U. Should fit 2200 and 3000 models of APC UPSes (or “schneider electric”). May fit other 2U UPSes and equipment. Be careful not to block any…
BOM required : ESP32 CMT2300A dev board with “E49-900M20S” chip OLED 0.96" screen “SSD1315” Dupont connectors External “868MHz~915MHz Antenna” with an IPEX4 <> Female SMA cable Use “Snug” support for both part and add “build plate only”…
Case (top and bottom) for OpenDTU hardware Printed on genius pro 0.2mm no support 2.5mm screws are needed to close the case. I used 2.5mm insert to attach ESP32 to the bottom (insert are heated thanks to soldering iron) You have 2…
Morse Taper 2 (MK2/MT2) x 1 drill bit holder. The tool holder has a 8° angle, which makes it easy to reach the tooling. The tool holder module couples with the attachment plate module, print one of each and you have what you need to hang…
MT2 / MK2 Stand for Mini Lathe This item helps to organise MT2 / MK2 tools, chucks and centers near your mini lathe. It can hold up to 12 tools, 3 allen keys and two chuck keys. Fits on top of the control box of a Technika lathe but can…
MT2 Stand for Morse Taper 2 Tools This stand allows you to store four MT2 tools on your bench or next to the machine. Use PLA or PETG for printing this one.
Replaces original Audi C4 sail panels 4A0857505 and 4A0857506 with mounts for Morel MT230 tweeters. I suggest printing from ASA filament on an enclosed printer. I've included the original scan of 4A0857505 if you want to model different…
Thanks to the original designer of this tool. I use it but it flexes at the handle, I fixed that.
Storage solution for Morse taper 2 Tooling. The insert fits into a 20mm bore. Printing Tips: I prefer PLA in 0.20 layers with 15% infill, printing upside down ensures a better finish of the taper.
Model has been modified from picture for better chuck key storage
Angled 15 degrees and added filets.
Gridfinity Live Center Holder
Attach your MT2 tools under a shelf ready for use. I printed mine with a 0.8nozzle for speed 0% infill orgainic supports work well for the bracket.
Another custom racing wheel for the HPI Sprint 2 RC car it should fit many other car brands as well.
Morse Taper 2 dead center holder for your gridfinity system
Feb. 20, 2021 : See the improved version of this print here: https://www.prusaprinters.org/prints/57606-9x207x10-mt2-lathe-draw-bar-handle-for-collet-hold Recently I purchased an ER32 collet holder for my lathes. The collet holder fits…
Thanks for the design. https://www.printables.com/model/7025 I didn't want to install any LEDs, so I closed the holes.
Размеры посадочного места на картинках. Печатал АБС пластиком, заполнение 15 процентов. Можно печатать и другим пластиком, усадки будет меньше, просто садится будет плотнее Подходит для Токарного станка WM210, закручивается винтом для…
This improved version of my previous print is a bit easier to use. The previous version worked, but the handle tended to get a bit jammed into the spindle hole. This new version still fits into the spindle hole, but it has a shoulder…
A wall mount for MT2 machine taper tools and collets, commonly used with smaller lathes and some mills. The part is intended to be printed upside down without supports. The wall mounts uses a pair of 1.5" long 0.25" countersink head wood…
The GPS bounced around in my vehicle, so I made this case to fix it on a vehicle wall. The magnetic charger cable can be connected below. Print instructions You might need support for the top opening.
Gridfinity with magnets, MT2 dead center holder LARGE style
Simple feet for the ZK-MT21 amplifier. No screws or glue required. Printing without support. PETG plastic is slightly flexible—the feet can be slightly bent to secure them to the amplifier body. The front and rear supports are slightly…
This bracket allows a standard 4-bow bimini top to flexibly mount to the 2.5" legs of the Monster Tower MT2 Wakeboard Tower. Print in Voron PIF settings with ASA for UV resistance. You will also need the following stainless-steel…
I do night rides on my local trails and didn't want to spend on a bike specific light. Since i have the Nitecore MT2C Pro, i opted to use that as the helmet mount light since its mighty bright. Clips the Nitecore MT2C Pro (or any 21mm…
MT2 lathe live center holder for gridfinity with magnets
3D printed chainguard laminated with epoxy and carbon fiber
Printed from TPU 95A. I had a problem with my mt200 brakes in winter. Snow and ice melt on caliper and then re-freeze on the brake pads and disc, causing a significant loss of braking power.
This file was scanned from a newly purchased MT28 body from Team Associated. I am using it for designing a new AE 28th scale chasses.
I added 1m to the width of the tire to “beef it up" a little bit while adding squish. It also reduces the weight from 6g to 3g per wheel, which improves performance since the car is about 120g and the total weight is reduced by 10%. These…
Gridfinity with magnets, holder for small size MT2 dead center
Added wall mount with two 3x screw holes
Wall mount for a drill chuck, MT2 shank, my drill chuck is a 13mm one, measuring about 43mm dia. The holder interlocks with other ones i have made. The screws i use to mount these to the wall are called 'Flange Head Self Tapping Screws'…
Simple Morse Taper 2 ( MT2) holder. Meant to store reducer sleeves so the opening was made narrower.
Gridfinity with magnets, holder for jacobs chuck JT33, with chuck key
Print in TPU, no supports, no brim needed (in my case)
MT2 wall mount Collet holders Someone asked if i could make a MT2 version of the R8 collet holder wall mounts, i don't own any MT2 collets, but i have a couple of MT2 bits for my mini lathe, so i modeled these using the (manky) dead…
This small box is to store a MT2 Livecenter and a MT2 Deadcenter in the Gridfinity drawer. Printed in PETG with a 0,6mm nozzle and 0,25mm layer hight, but all other settings should also work.
This holder is for a MT2 shanked live / revolving centre, my centre has a 40mm dia. body. The holder interlocks with other ones i have made. The screws i use to mount these to the wall are called 'Flange Head Self Tapping Screws' Print…
Revitalize your RC experience with our A-Frame Support Replacement for MT2 Nitro RC. Enhance stability and performance while restoring your vehicle's agility. Elevate your off-road adventures by upgrading to this essential part. Get back…
Simple diffusor for Nitecore MT21C. Suction fit on either end of the flashlight. Vase mode Einfacher Diffusor für Nitecore MT21C. Saugende Passung für beide Enden der Taschenlampe. Vasenmodus
A holder for an MT2 dead centre. The holder interlocks with other ones i have made. The screws i use to mount these to the wall are called 'Flange Head Self Tapping Screws' Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No…
Simple gridfinity box for 6 pcs of MT2 inserts used for small milling machines.
Realized I lost my rear bleed nipple cover. Looked online for a replacement, which would've been 2-3 eur. This entire damn brake caliper costs like 10 euros new, so I just decided to print my own replacement lol I printed this in TPU with…
Aamplifier of my old Logitech G51 stop working, so I made 2.1 out of it using ZK-MT21 Subwoofer Amplifier Board I had laying around. Did not finess the model, use it ase baseline, or for remixing. Also whole plate shall be maybe 1 or 2 mm…
I designed this spacer to fit the Magura MT2 (2020 model) hydraulic brake caliper. This tool blocks the piston on one side to allow the piston on the opposite side to extend out of the caliper so that it can be cleaned and lubricated.…
In two lengths - according to your taper.
i wanted a simple holder for my live center and couldnt find a MT2 model that would fit in my tooling drawer because they all stuck out to high so i made my own live center fits nicely easy to take in and out used PLA+ print took 1hr 34…
Hello i designend a place holder for my minimill, so that my taper wouldnt get dirty while nothing is in the spindle. It has the taper for an MK/MT2 spindle and a M10 thread. The handle bar has a knurl for easier handling.
just the spare for the steering part of the radio
Store your MT2 and your C20 ER20 100L Collet. Install with M5 18mm bolts
If you have a bunch of laptops, you can now store and reach them easier, This model is parametric and fitted to HP MT22. The charging-port version might not work, test with a smaller print. Feel free to adapt this to any laptop type.
Zemismart MT25B adaptors for 40mm keyed roller tube (Acmeda S40HD-style) Adaptors to fit a Zemismart MT25B 25mm tubular motor (Matter over Thread) into a 40mm keyed roller-blind tube with internal T-ribs and dovetail hooks, believed to be…
just the spare for the steering part of the radio
Размеры посадочного места на картинках. Печатал АБС пластиком, заполнение 15 процентов. Можно печатать и другим пластиком, усадки будет меньше, просто садится будет плотнее Подходит для Токарного станка WM210, закручивается винтом для…
I designed this spacer to fit the Magura MT2 (2020 model) hydraulic brake caliper. This tool blocks the piston on one side to allow the piston on the opposite side to extend out of the caliper so that it can be cleaned and lubricated.…
MT2 Quill that can be used to build your own lathe or lathe extensions like a sphere turning attachment, copy/curvlineal attachment or for ornamental turning. Also can be used for grinding and sharpening tools on mill and lathe, etc.
https://de.aliexpress.com/item/1005005986808041.html?pdp_ext_f=%7B%22sku_id%22%3A%2212000035425740359%22%7D&sourceType=1&spm=a2g0o.wish-manage-home.0.0&gatewayAdapt=glo2deu https://ae01.alicdn.com/kf/Sc00305d77c644a04a9fcfdb391b70b57g.jpg…
my first model I hope it will be useful to you caliper alacak param olmadığı için telekinezi ile ölçmem gerekti…
