MT25B adaptor for Acmeda S40HD tube profile
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adaptor to allow the use of Zemismart MT25B blind motor with blinds using acmeda S40hd tubes.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 25
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
Zemismart MT25B adaptors for 40mm keyed roller tube (Acmeda S40HD-style)
Adaptors to fit a Zemismart MT25B 25mm tubular motor (Matter over Thread) into a 40mm keyed roller-blind tube with internal T-ribs and dovetail hooks, believed to be the Rollease Acmeda S40HD profile (RB91-0240-000550). The motor's included adaptors do not suit.
Print the test disc first, it's a 5mm slice of the tube profile. If it slides into your tube and engages the dovetail channels, the real parts will fit.
Parts
- Drive wheel - presses onto the motor's 4×6mm shaft (designed as a snug fit to avoid stripping, gently tap on), retained by the motor's clip. Transfers the torque.
- Crown - slips over the motor body onto the head collar, notch over the rib, flange against the tube end. Supports the tube; spins freely.
- Test disc - fit check for your tube.
Print settings
I used PETG for heat resistance (direct sunlight) and it is working well but it has not been on for long.
PETG-GF or CF would be better, Nylon would probably be ideal or PLA/PLA+ for a shaded window. Alternatively some epoxy between the shaft and drive wheel could work well to prevent stripping also.
PETG, 0.2mm layers, no supports.
- Drive wheel: solid face down, 6 walls, 100% infill — not optional, the shaft socket strips at normal settings.
- Crown: flange down, 4 walls, 40% infill.
Assembly
Tap wheel onto shaft (solid face toward motor) → fit retaining clip in the recess → crown over motor onto collar, notch on rib → slide into tube, lobes into the dovetail channels, until the crown flange meets the tube end.
Made with CadQuery; dimensions dialled in on a real tube with calipers and several test prints. Script available to adjust dimensions if needed.