Liczymy pasujące modele…
I wanted to connect the reasonably priced IKEA Fridans Roller-shade with a roller motor. The IKEA motorized roller shades are quite pricey (+100€) in Germany and I did not want to dive into the IKEA smart Home system. The zemismart AM15…
Zemismart does the cheapest Zigbee/WiFi motors to automate roller blinds, but don't for 32mm tubes, common in the UK. Zemismart ZM16 motor in AliExpress They provide adapters for 17 25 28mm, and there are some other models for 37 38mm.…
I printed with 10 wall lines and 100% infill. I have a hefty blind, so I don't want to take any chances. For the freewheeling tube plug, I used the included metal axle with a standard skateboard bearing. I used these ones, but any…
I bought Zemismart Zigbee roller blind motors online, but they didn't fit my existing aluminium tubes with a singular groove. Printing instructions PETG. PLA might be sufficient for the “Chuck” but I expect the “Hanger” might start…
Those adapters has been made for Zemismart ZM16B Zigbee Smart Roller Shade Blinds Motor , but can work with others... Just remove old motor and replace it with new one with provided adapters. Everything fits without further modifications.…
I purchased some roller blinds from the Danish shop “JYSK”, which unfortunately was a bit incompatible with the adapters delivered with the Zeinsmart zigbee roller blind motor - so I had to create my own version of the adapters, so the…
I live in a old house and have double box windows (Doppelkastenfenster) where I would like to install the blinds inbetween windows in the box. Here the room to attach and maneuver is very tight so I had to take about 2cm out of the…
This is an adapter for Zemismart Zigbee 17mm tubular motor ZM16EL, to work with 32mm OD window blinds tube. I've print them in PETG but PLA should work too. The shim is necessary to fit in the motor grove at the cap. I've glued it up with…
The easy way how to install Zemismart AM15 smart blinds motor to window frame/door. Perimeters: 5 Material: PETG
A 10mm spacer/riser to fix any offset on your door/window sensor
The original adapter is not compatible with the JYSK BOLGA Blackout roller blind, because it has a notch on the inside that holds the fabric:
This is an adapter for Zemismarts motorized blind motor. It's designed to fit 28mm IKEA tubes that lack an inner ridge. I recommend printing it with the large flat surface down. I have only tested the adapter for 2 weeks so I have no…
Enables installation of Zemismart motor on blinds found in LeroyMerlin.
I made these adapters so that the Zemismart roller blind motors designed for 37mm and 38mm roller blind tubes would fit the 44mm aluminium tubes (Acmeda type). This allows me to use the much cheaper Zemismart motors available on…
This lets you use your existing switches as a mount for the Blindsmart/Zemismart ZMR4 scene controller. You will need to print with supports for the underside, but they come off very cleanly for me. I was going to add space for a command…
Zemismart roller tube motors didn't come with an adapter for my size roller tubes. I made these for the ZM25EL motors
If your roller shade is not 100% aligned with your window frame when it's rolled out, you can use spacers. Put the spacer between your ceiling and bracket - lowering the bracket a little. I created 1mm and 2mm versions, but you can easily…
I wanted to retrofit Zemismart Zigbee 17mm motors to my Blinds2Go Perfect Fit blinds but even the 17mm model was too tight to spin freely. Parts available are a newly designed roller tube with the same 25mm size but the Zemismart motor is…
To lift a fairly large and heavy roller shade, I bought a Zigbee-connected Zemismart 47 mm roller shade motor (ZM35R1). Unfortunately, the included adapters did not fit my curtain rod due to additional internal insets. I designed and…
The Blindsmart/Zemismart ZMR4 Zigbee scene controller comes with a mount that will work great if you want to use it as the only device in a single gang box, but if you want to use it with other equipment, in a double, triple or bigger…
TL;DR This is a set of adapters that allows you to fit a Zemismart ZM25EL tubular motor to a 30mm inner diameter (32-33mm outer) roller shade tube, instead of the 37-38mm tubes they are originally designed for. Assembly is very easy and…
Replacement curtain carrier for Zemismart smart curtain system. I found the original to be too big and did not like the staggered design. Print Settings Material: Bambu PETG HF Print without supports 0.2mm layer height 100% infill…
To lift a fairly large and heavy roller shade, I bought a Zigbee-connected Zemismart 47 mm roller shade motor (ZM35R1). Unfortunately, the included adapters did not fit my curtain rod due to additional internal insets. I designed and…
