1 / 7
Adapter for IKEA Fridans Roller Shade with Zemismart AM15 Motor — zdjęcie 1
1 / 7

Adapter for IKEA Fridans Roller Shade with Zemismart AM15 Motor

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Fitting Adapter to use the zemismart AM15 motor with the IKEA Fridans Roller Shade. Tube size of 27mm

Ocena
0 / 5
Polubienia
11
Pobrania
150
Wydruki
0
Wyświetlenia
1893
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I wanted to connect the reasonably priced IKEA Fridans Roller-shade with a roller motor. The IKEA motorized roller shades are quite pricey (+100€) in Germany and I did not want to dive into the IKEA smart Home system.

The zemismart AM15 motors had a good pricepoint and felt easy to use stand-alone or through Zigbee in a Smart Home. Sadly, they are not offered with an adapter set for the 2 7mm Fridans tubes but only for 17 or 25mm tubes.

So I needed to build an own set of Adapters:

  1. Adapter-Ring on the shaft next to the USB-C Plug
  2. Adapter at the End of the Motor Shaft 
  3. Adapter plugging into the non-motor side of the Fridans tube. Here the metal pin needs to be taken from the zemismart and re-inserted into the Adapter

I printed all Adapters with 0.15 and the fit snuggly with some pressure. Depending on production tolerances of the Fridans tube you might need to sand down or scale the model a tiny bit.

Make sure that when assembling one of the two large grooves fit on the bulge inside the tube (Last picture blue arrow)

Tagi