1 / 7
Adapter for IKEA Fridans Roller Shade with Zemismart AM15 Motor — image 1
1 / 7

Adapter for IKEA Fridans Roller Shade with Zemismart AM15 Motor

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Fitting Adapter to use the zemismart AM15 motor with the IKEA Fridans Roller Shade. Tube size of 27mm

Rating
0 / 5
Likes
11
Downloads
149
Makes
0
Views
1,880
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

I wanted to connect the reasonably priced IKEA Fridans Roller-shade with a roller motor. The IKEA motorized roller shades are quite pricey (+100€) in Germany and I did not want to dive into the IKEA smart Home system.

The zemismart AM15 motors had a good pricepoint and felt easy to use stand-alone or through Zigbee in a Smart Home. Sadly, they are not offered with an adapter set for the 2 7mm Fridans tubes but only for 17 or 25mm tubes.

So I needed to build an own set of Adapters:

  1. Adapter-Ring on the shaft next to the USB-C Plug
  2. Adapter at the End of the Motor Shaft 
  3. Adapter plugging into the non-motor side of the Fridans tube. Here the metal pin needs to be taken from the zemismart and re-inserted into the Adapter

I printed all Adapters with 0.15 and the fit snuggly with some pressure. Depending on production tolerances of the Fridans tube you might need to sand down or scale the model a tiny bit.

Make sure that when assembling one of the two large grooves fit on the bulge inside the tube (Last picture blue arrow)

Tags