MT25B adaptor for Acmeda S40HD tube profile
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An adaptor to allow the use of Zemismart MT25B blind motor with blinds using acmeda S40hd tubes.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 25
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
Zemismart MT25B adaptors for 40mm keyed roller tube (Acmeda S40HD-style)
Adaptors to fit a Zemismart MT25B 25mm tubular motor (Matter over Thread) into a 40mm keyed roller-blind tube with internal T-ribs and dovetail hooks, believed to be the Rollease Acmeda S40HD profile (RB91-0240-000550). The motor's included adaptors do not suit.
Print the test disc first, it's a 5mm slice of the tube profile. If it slides into your tube and engages the dovetail channels, the real parts will fit.
Parts
- Drive wheel - presses onto the motor's 4×6mm shaft (designed as a snug fit to avoid stripping, gently tap on), retained by the motor's clip. Transfers the torque.
- Crown - slips over the motor body onto the head collar, notch over the rib, flange against the tube end. Supports the tube; spins freely.
- Test disc - fit check for your tube.
Print settings
I used PETG for heat resistance (direct sunlight) and it is working well but it has not been on for long.
PETG-GF or CF would be better, Nylon would probably be ideal or PLA/PLA+ for a shaded window. Alternatively some epoxy between the shaft and drive wheel could work well to prevent stripping also.
PETG, 0.2mm layers, no supports.
- Drive wheel: solid face down, 6 walls, 100% infill — not optional, the shaft socket strips at normal settings.
- Crown: flange down, 4 walls, 40% infill.
Assembly
Tap wheel onto shaft (solid face toward motor) → fit retaining clip in the recess → crown over motor onto collar, notch on rib → slide into tube, lobes into the dovetail channels, until the crown flange meets the tube end.
Made with CadQuery; dimensions dialled in on a real tube with calipers and several test prints. Script available to adjust dimensions if needed.