1 / 2
Tesla Model Y 2024 Air cover (German Berlin made)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Air cover for the rear vent in Tesla Y 2024 german made
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 189
- Wydruki
- 0
- Wyświetlenia
- 1078
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (35)Powiązane
Air vent cover for the rear vent underneath the seats, specifically made for the Model Y 2024 from Berlin Germany (see pics).
The STL is a plain block to allow custom mesh density using print settings.
Use thin strip of double side tape (like 3M VHB) to keep in place.
Printing instructions (MANDATORY):
- PETG or other heat resistant filament
- 0 top layer
- 0 bottom layer
- 6 perimeters (with a 0.4mm it will end up at 2.88mm thickness)
- Infill 15%+ honeycomb (fill angle 0)