1 / 2
Tesla Model Y 2024 Air cover (German Berlin made)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Air cover for the rear vent in Tesla Y 2024 german made
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 189
- Makes
- 0
- Views
- 1,071
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Air vent cover for the rear vent underneath the seats, specifically made for the Model Y 2024 from Berlin Germany (see pics).
The STL is a plain block to allow custom mesh density using print settings.
Use thin strip of double side tape (like 3M VHB) to keep in place.
Printing instructions (MANDATORY):
- PETG or other heat resistant filament
- 0 top layer
- 0 bottom layer
- 6 perimeters (with a 0.4mm it will end up at 2.88mm thickness)
- Infill 15%+ honeycomb (fill angle 0)