1 / 2
Prusa MK3s+ and MMU3 - Orca Slicer profile — zdjęcie 1
1 / 2

Prusa MK3s+ and MMU3 - Orca Slicer profile

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

0,19 € – 0,24 € netto (bez VAT)

Dla pliku: TEST PLA 14m48s.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 0,21 € netto (środek widełek).

Masa podana przez autora
3 g
Czas druku podany przez autora
12 min
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Working profile in Orca Slicer for a Prusa MK3s+ and MMU3

Ocena
5 / 5
Polubienia
67
Pobrania
980
Wydruki
3
Wyświetlenia
3272
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Working profile in Orca Slicer for a Prusa MK3s+ and MMU3.
Tested with 1000+ tool changes with no cloggs and only one user error :D

This is no longer getting updated since I sold my MMU3.

 

Video guide

Step-by-Step video guide


Instructions to import the profile

  1. Add the "Prusa MK3s+" using Orca Slicers “Select/Remove printers(system presets)”
  2. Unzip the .zip file
  3. Import the config by selecting file > import > import configs
  4. Adjust the filament settings if needed, look at the 2 pictures below for my settings for PLA(210 °C)
  5. That's it. Let me know if you encounter any problems :D

 

 

Filament settings > Multimaterial

 

 

 

 

 

 

 

 

 

 

 

 

 

Filament settings > Multimaterial > Ramming settings

 

 

Change Log:

29/07/2024 - Toolchange parameters: Improves the time it takes to unload and load filament and the filament tip is more consistent

Tagi