1 / 1
T-Stick Powerchair Hockey v2 — zdjęcie 1

T-Stick Powerchair Hockey v2

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

T-STICK printable in one piece. Required print area 300+

Ocena
0 / 5
Polubienia
0
Pobrania
32
Wydruki
0
Wyświetlenia
168
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Indoor Sports
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I recommend printing from FLEX with hardness 98A. It has worked well for me to vary the number of perimeters at different heights (see my G-code).

After you have printed the T-STICK, you need to put the melting nuts M5 into the holes on the top of the T-STICK (I bought these).

Finally, you can use the long screws (or threaded rod) M5 to attach the T-STICK to the steel you are attaching to the powerchair.

Tagi