FLSun SR Orbiter & Revo Voron Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified effector setup to use an Orbiter 2 extruder and E3D Revo Voron hotend on the FLSun SuperRacer
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 484
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
I wanted my SR to match all my other printers, all under a single nozzle ecosystem and all with the same direct drive extruder.
Sorry this doesn't have more detail, it's been a bit since I put mine together, and I'm actively working on a separate effector replacement mod. I'll add more pictures of the full assembly another time.
Printing
I printed it in ASA with 4 perimeters and 30% infill.
I'd probably stick with ASA, ABS, or PC for this, as you need the rigidity and the temperature resistance.
Assembly
This mod requires the following hardware components:
- 18 M3x3 heatset inserts
- 4 M2x3 heatset inserts
- 6 M3x8 screws
- 6 M3x8 threaded steel balls
- 6 M3x12 grub screws
The M2x3 inserts are for the part cooling fans and go on the sides of the hotendBlock, while every other insert-hole is for the M3x3 inserts.
Overall, assembly should be very reminiscent of the stock effector.