Fast Shoes Organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The fastest and lighter ever!
- Ocena
- 4,875 / 5
- Polubienia
- 1500
- Pobrania
- 3430
- Wydruki
- 24
- Wyświetlenia
- 18 858
- Oceny
- 24
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
NEW VERSION AVAILABLE!
Thank you very much for your feedback.
I’ve created version 2 of this shoe organizer, which now features a clasp to keep the top in place.
Keep writing for more suggestions!
ADDED MK4 PROFILES! (slower than a bambu…)
This is not my first shoe organizer, but I wanted to create one that is much faster and much lighter!
In just 3 hours and with only 130gr, you will have an organizer ready to be used!
And the nice thing is that you can customize it as you like!
There are already 3 patterns in the file, but just change the type of filling in the modifiers, and you’re done!
HOW DOES IT WORKS???
For those using STL,
LOWER:
you need to create a modifier of 245x130x3 that covers the entire base of the object and positioned at a height of 1.5mm.
UPPER:
you need to create a modifier of 245x130x5 that covers the entire base of the object and positioned at a height of 2.5mm.
At this point you need to set 4 perimeters, 0 top layer, 0 bottom layer and the infill you want.
-- PRINTING PROBLEMS --
I know how frustrating it can be to have problems during a print, and I’m happy to receive constructive criticism or suggestions about the model, but please always calibrate the flow and if you have adhesion problems, try using the brim or a gripper. All these fails are not due to the model.
All my files are tested before being published and the print profile with which I succeed is the one I publish.
Thank you very much for your understanding and happy printing to everyone!