1 / 5
H7 bulb replacement tool. — zdjęcie 1
1 / 5

H7 bulb replacement tool.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacing the H7 bulb in some headlights is a procedure designed for an octopus. This tool puts it back into human hands

Ocena
5 / 5
Polubienia
24
Pobrania
136
Wydruki
3
Wyświetlenia
662
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Garage
Licencja
Creative Commons — Attribution — Share Alike

Bulb replacement procedure:

  1. Open the headlamp cover.
  2. Disconnect the electrical connector from the bulb.
  3. Snap the tool onto the bulb contacts.
  4. Unlock the spring latch.
  5. Pull out the tool with the bulb.
  6. Replace the bulb in the tool with a new one.
  7. Hold the spring latch open with your finger and insert the new bulb in its place with a tool. Observe the correct placement of the bulb in the socket.
  8. Lock the spring latch.
  9. Pull the tool out of the headlight.
  10. Connect the electrical connector to the bulb.
  11. Close the headlamp with the lid.

Done in a few minutes.

Tagi