1 / 1
Little Ladder (Widdle Wadder) With Embedded Magnets
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A little ladder with magnets embedded in the feet.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 110
- Wydruki
- 0
- Wyświetlenia
- 444
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
Little Ladder
This is a slightly larger little ladder created to attach to cars or a fridge. Embedded magnets help avoid the magnets from scratching paint. No text is printed on the ladder so you can customize it anyway you would like.
Required Materials
- I printed in PLA+ for indoor use. You may want PETG if you're putting it on a car.
- The holes are made with a .5mm tolerance for 6mm x 3mm magnets. This allowed them to rattle for me, so you may want a dot of glue if you wish to avoid that.
Print Instructions
- Print face down with the legs going upward.
- No supports required.
- .2mm layer height.
- Pause at the beginning of layer 149 and insert your magnets.