1 / 9
FrSky Taranis Q X7 Travel Case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Travel case for my Taranis Q X7.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 81
- Wydruki
- 0
- Wyświetlenia
- 358
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (7)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (12)Powiązane
A case for transporting my radio to and from flight locations and storing it at home.
It has a locking tab at the bottom and a Velcro strap (25mm wide) up top to keep the lid secured. Also has loops for a carrying strap (Up to 25mm wide). Two M5x15 bolts are used to keep the Velcro strap in place using the 'Thingy’.
The case has some wiggle room inside to accommodate for padding that was not yet added in the photos.
Printing took about 12hrs and 600g of PETG.
The Storage version has a 25mm x ~200mm section for the neck strap and charging cable