Hanger holder for screwdriver DeWALT DCF680G2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Do you own amazing gyroscopic DeWALT DCF680G2 and has no place for storage? This hanger holder is perfect for hang…
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 239
- Wydruki
- 3
- Wyświetlenia
- 897
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Do you own amazing gyroscopic DeWALT DCF680G2 and has no place for storage? This hanger holder is perfect for hang screwdriver and two batteries in bottom of shelf.
There is hole for screwdriver and small gap to keep device in even in "not perfectly horizontal installation". Second battery can be stored in bottom part.
Another idea is to make holes for screwdriver's bits above battery, but I'm not sure if somebody needed. Just let me know your opinion in comments.
If you print this thing, I will be happy to see your make in "Post a make".
Print Settings
Rafts:
No
Supports:
No
Resolution:
0,2 mm
Infill:
30
Filament:
Fillamentum PLA
Notes:
My prototype was printed with 0,6 mm nozzle, layer heigh 0,35 mm and only 15% Gyroid infill. I was suprised that even in this "fast-mode" hanger seems to be good for hobby use.
Anyway, final print was made with 0,6 mm nozzle, 0,2 mm layer height and (just for sure) 3 perimeters. No supports needed.
Post-Printing
There is 2 holes for screws up to 4 mm diameter.
Category: Tool Holders & Boxes