Broken Blind Repair Tabs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Customizable Blind Tabs to Repair Broken Blinds
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 173
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Let's face it, if you're here, we all know what happened. One of your pets decided to bravely defend your household against an intruder that didn't exist. Now you're left with a blind that looks like it lost a round with a ghost.
CUSTOMIZABLE
If you don't have OpenSCAD, you can edit this file inside of the Maker World Parametric Model Maker here: Customize These Tabs.
You can customize this inside of OpenSCAD. You'll need a few measurements. First, grab the thickness of your blind (front to back) – most are between 50mm and 65mm. Next, measure the width of the patch. How long do you want the sleeve to be? I recommend adding about 10mm to the length of the crack for good measure. Lastly, decide how thick you want the walls to be. On average, it's about 15 minutes per tab, depending on how big you need these to be.