Anycubic Photon Easy Bed Level v3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A new version of the Anycubic Photon "More Easy Bed Level"-Mod. It features Threaded Inserts and a more robust design.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 228
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a remix of the other Easy-Bed level mods for the Anycubic Photon printer. The last version broke and deformed after a while, so i designed this version, that is a little bit sturdier and features threaded inserts for the Locking screws.
One warning though: I dont recoment printing in PETG! I have experience that the gases and fumes from the resin does affect the plastic fundamentally and makes it really brittle. I have no experience yet with other types of Plastic, but after around 6 months or so, the PETG did completely cruble and break.
f360 file included.
Hardware used:
- 4x M3x45mm screws, vertical for holding the printbed
- 4x M3x10mm brass threaded inserts
- 4x M3x8-10mm (original screws from the printer) vertical fixation from the botton
- Knobs:
- 4x M3x30mm screws for fixation or
- 4x Knobs from the “More Easy Bed Level”-Mod
Leveling is super easy:
- Remove bed
- HOME Z
- place a paper unter the printbed
- lower z a little bit
- press lightly on the printbed, make sure the paper is moving and has even pressure
- Set Z 0 and secure the lateral screws.
- The plate is perfectly leveled.