Weedo Tina2 V7 / Tina2S v6 Anti-Z-Wobble
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A little remix of the Anti-Z wobble mod by @Wingertsknorze.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 101
- Wydruki
- 0
- Wyświetlenia
- 565
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
A little remix of the Anti-Z wobble mod for the Tina2 V3 by @Wingertsknorze.
Update for the Tina2 V7 (and it's clones) that does not have a nub on the end of the Z-axis leadscrew, requiring a larger hole to insert the leadscrew.
Added a NEW version, since there seems to be a small length difference in some Z-axis leadscrews. Works the same, just a tad shorter for slightly taller leadscrews. Also seems to fit the Tina2S v6.
Recommend to use a couple of drops of superglue to attach the adapter to the top cover and add a dab of PTFE grease in the hole for smooth operation (just to be sure).
Known clones of the Tina2:
- Monoprice Cadet
- Bresser Raptor
- Gembird Gemma
Leaving a like and/or make would be appreciated!