1 / 2
Sovol Dryer PC4-M10 Adapter for PTFE Tube
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
PC4-M10 Adapter for PTFE Tube for Sovol Dryer
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 184
- Wydruki
- 1
- Wyświetlenia
- 902
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (48)Powiązane

Hi there,
I have designed an adapter for PC4-M10 connectors for the Sovol Filament Dryer.
The original nut can still be used.
To close the connectors you can print these caps in TPU --> TPU Cap
I have created a longer and a shorter version.
If you want to use other seals or similar, you can use the longer version. Otherwise, the short version should be sufficient.
As usual: do not overtighten the connectors and use PETG or stronger material.
Have fun