1 / 2
HO Scale 2 and 3 Bay Hi-Side Hopper for Resin Printing — zdjęcie 1
1 / 2

HO Scale 2 and 3 Bay Hi-Side Hopper for Resin Printing

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix of @SDHayes' 2 Bay and 3 Bay HO Scale Hi-Side Hoppers combined. The remix is done to enable easy Resin printing.

Ocena
0 / 5
Polubienia
9
Pobrania
95
Wydruki
0
Wyświetlenia
1015
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Attribution — Noncommercial

THESE ARE NOT FOR FILAMENT/FDM PRINTING!

See SDHayes' original model for a great FDM set of files.
______________________________________________________________________________

7/18/24 - Now includes the 2 and 3 Bay models together - only the sides and bottom differ.  Print the ends, bogies, and coupler covers for both models.

For best results, I recommend an ABS-Like resin.  I use Anycubic's ABS-Like v3 and the SUNLU ABS-Like resins.  I'm sure that other brands work, but try to stay with ABS-like or Fauxhammer's WARGAMER resin for best results.  Standard resin tends to be a little too brittle.  Be careful around the steps and the end pieces when removing the supports as those bits are very fragile (the main reason for ABS-Like resin). I also recommend that you do not remove the support structure from the small coupler covers when you start to clean them to prevent them from getting lost in your wash pass - yep, ask me how I know …

If you MUST use standard resin, I recommend not removing ANY supports until after you have cured the pieces to prevent warping.

The attached photos were printed using a translucent black so I could see all of the zits created by the supports and try to improve them.

You will need small, self tapping screws for the trucks/bogies and the coupler covers.  I recommend Kadee 520or Intermountain 33" Metal wheelsets (4005X) and Kadee 148 Centerset Medium Shank Whisker couplers with 2-56 x 1/2" Screws for the trucks and 0-40 x 1/4" for the couplers.  Depending on your wheelsets (if you don't use the above), it might be a good idea to add Kadee fiber spacing washers to get the coupler height correct.

______________________________________________________________________________

I'm working on some of his other FDM designs for Resin success.  Stay tuned …

Tagi