1 / 5
Everything Pressence Lite Busch Jaeger Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount your Everything Pressence Lite mmWave Sensor tidy and mains powered underneath a Busch Jaeger Futur Linear Rocker
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 429
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I always wanted mmWave Motionsensors inside my house.
And I had several “blind switches” because of smart lights which have to stay on all the time so here's a (imho) really cool mount for your Everything Presences Lite.
Things to print:
- Just the “Halterung EPL” with your preffered filament ( I used some transparent PETG)
Things to buy:
- Buy yourself a high quality powersupply for flush monted sockets (I bought myself the 5v2A Scaleo systems AC/DC-Einbaunetzteil)
- Buy a Busch Jaeger Future Linear Rocker in the desired color
Preperation:
- Use a dremel to remove all bridges on the backside of the Busch Jaeger Rocker (everything has to be flat except the 2 rounded things in the middle and the 4 small edges on the sides)
- Solder two jumperwires to the pins 5V and GND
- Drill two small holes in your Busch Jaeger frame (3mm drill diameter) to locate the frame to the wall
Assembly:
- Connect your power supply to mains and the powersupply with WAGO clamps to your EPL
(Always turn off mains power before working - in other words: user your brain, be careful) - Insert your EPL into the bracket and mount everything inside the Busch Jaeger Frame.
To ensure a perfect fit for your rocker, I used two small strips of power Test tape
Add to HA
I won't go into detail here, everything has been described here:
https://everythingsmarthome.github.io/everything-presence-lite/